The Suzuki GSX-R Throttle bodies stripped of some of the items not required. These are to be fitted to engine along with a Megasquirt DIY Engine Control Unit.

The home made inlet manifold plate in construction, holes to be smoothed out yet. If you look carefully you can see the scribed outline of the inlet gasket ready for sawing around. There are 4 inlet tubes to be welded on to accept the throttle bodies. The TBs will be mounted with a short section of silicon tube and clamps.

A CHANGE OF ISP AFTER AN ARGUMENT MEANS SOME INFO IS MISSING

Throttle Bodies fitted and now working